Bonney Vise & Tool / Bonney Forge & Tool Works
This article, for the most part, re-writes the majority of early Bonney history. We will link all assertions to their relevant resources so that the reader might investigate for themselves.
In either late 1876 or early 1877, Charles S. Bonney formed a company under the name C. S. Bonney & Son. Many of the advertisements and paraphernalia discovered contains the "Established 1876" marking, however there has yet to be discovered any documentation of the actual date of formation for the company. This article from 1898 describes the formation of the company in 1877 at Seventeenth & Barker streets. The same article asserts that Bonney relocated the company to Frankford Street in 1878. Again in the same article, Bonney moved the company again to 639 Arch Street in 1880. Again using the same reference, the company was moved to their famous Philadelphia location of 3015 Chestnut Street in 1882. On July 2nd, 1881, Bonney Vise & Tool Co. (Limited) was formally registered as a business entity in the state of Pennsylvania under Business Entity # 5828301. On November 19th, 1881, the company was re-registered as "The" Bonney Vise & Tool Co. (Limited) under Business Entity # 4633103. We have discovered no further information covering the period between November, 1881 and July 1885.
During our research, we were lucky enough to locate and obtain an original copy of the 1886 edition of a Bonney catalog. Inside the front cover of that catalog (also inside the front cover of the 1888 catalog), we made a startling discovery; on July 28th, 1885, C. S. Bonney sold his interest in The Bonney Vise and Tool Co. (Limited) to John B. Newkirk. All Bonney products would be sold under the Philadelphia Hardware purveyor Newkirk, Ritchie & Bells. By the end of 1888, Mr. Bells left the partnership and was replaced by Mr. Armstead O. Bills, who was to become a major part of the Bonney legacy. Outside an article from The Allentown Leader (newspaper) gossip section on December 15, 1917, we can find no evidence of any Bonney family involvement in the company after it was sold in 1885. The Allentown Leader article, which identifies Henry G. Bonney as the "founder of the Bonney Vise and Tool Works." This reference provides credence to the formation of the company as C. S. Bonney & Son. The article states: "GUESTS OF COL. FRANKLIN. Lieutenant Colonel C. P. Franklin, executive officer of the Ambulance Camp, had as a visitor Thursday his father-in-law, Henry G. Bonney of Philadelphia, the founder of the Bonney Vise and Tool Works. With him was his son, Lieut. Kenneth C. Bonney, who enlisted in the Coast Artillery and won a commission. He had been sent to France and England on special missions and is now going across again for active service." Exhaustive searches of records yields virtually nothing about Henry G. Bonney, and absolutely no association with the company outside of this "gossip section blurb."
Records show that sometime in 1890, A. O. Bills obtained sole rights to Bonney and reorganized the company, with many resources showing A. O. Bills as "Sole Proprietor." Presumably as part of the reorganization by Mr. Bills, The Bonney Vise & Tool Co. (Limited) became Bonney Vise & Tool Works. Even though the corporate entity of "Bonney Vise & Tool Works" wasn't formally registered with the USPTO until March 17th of 1908, there are enough advertisements with that company name during the early 1890's to surmise that the name change happened around 1890. The "takeover" by A. O. Bills appeared to be a great success as, by 1898, the company had grown to 60 payroll employees. As part of this growth, in 1894 Mr. Bills struck a deal with the J. H. Graham & Co. of NY, naming them the sole factory direct distributor for Bonney manufactured tools and implements. In 1896, Bonney introduced "The only all steel vise ever put on the market," further broadening the product line. There is also evidence that on April, 10th of 1900, the Bonney facility narrowly escaped disaster from a fire. The damages from the fire were estimated at $150. Based on CPI, in today's dollars the damages would equate to around $4500. On November 30th, 1902, Joseph G. Baker, a prolific inventor for Bonney, filed his patent for "The Masterpiece." This combination pipe wrench/pipe cutter was revolutionary for the time and jobbers and purveyors of Bonney products could not keep them in stock. By 1906, demand was so high for Bonney products that another factory (not yet identified) in New York was outsourced and producing Bonney products almost exclusively. This portion of Bonney history is somewhat sketchy, having found very little evidence to document the era between 1905 and 1909. During that timeframe, A. O. Bills disappears from all advertisements and records pertaining to Bonney. Emerging from this era is the Durham family.
In 1907, Mr. Joseph E. Durham becomes President of Bonney and on September 1, 1907, his son Joseph E. Durham becomes Vice President and Treasurer, and his other son Fred becomes Vice President. At this point, we are assuming that the Durham family bought out A. O. Bills in 1907 and took over Bonney operations. In 1909, Bonney factory operations were moved to Allentown, PA, although offices were still retained in Philadelphia. The company thrived in Allentown, significantly expanding it's product line into wrenches, specialty wrenches and other mechanics hand and specialty tools. By 1916, the company broke ground on a new facility to keep up with ever growing demand for their products. On March 2, 1921, in order to more appropriately match the name with their genre of products, Bonney again changed their name from The Bonney Vise & Tool Works, to Bonney Forge and Tool Works.
In 1933, as reported in Iron Age, Volume 131, Bonney organized the Gray-Bonney Tool Co. Ltd. of Canada. According to other sources, Gray-Bonney was a partnership between the two companies with primary leadership coming from Gray.
***More to come as research progresses***
From Wikipedia: Bonney Forge was founded in Philadelphia, Pennsylvania in 1876 by Charles S. Bonney. Originally Bonney Forge crafted forged and finished hardware for horse-drawn wagons, later it became a manufacturer of automotive hand tools, and now it is a manufacturer of fittings and unions, branch connections, steel valves and specialty products. In 1953 Bonney Forge was taken over by the Miller Manufacturing Company of Detroit, Michigan. In 1964 the firm was sold to Kelsey-Hayes Corp. of Romulus, Michigan. The company was for many years based out of Allentown, Pennsylvania, where it had some of its manufacturing operations. Bonney Forge also had manufacturing operations in Alliance, Ohio, Orangeburg, South Carolina and near Milan, Italy. Plant closures In March 1964 Bonney Forge closed its manufacturing plant in Alliance, after if moved manufacturing operations from there to the Kelsey-Hayes Corp. plant in Orangeburg, South Carolina. In August 2001 Bonney Forge closed its manufacturing plant in Allentown because the plant building could not be modernized to handle a new press. In 1967, the pipe fittings and valves portion of Bonney Forge was sold to the Gulf & Western Company where it continued to produces these goods until 1984. In 1984, a successful leverage buyout brought the Bonney Forge company back into privately held hands where it remains today. From the Bonney Forge Website: Bonney Forge, founded in 1876, initially forged and finished hardware for horse drawn wagons. The company's product line, all requiring metal working and machining, evolved during the first half of the 20th century. The products included hand tools, military hardware and commercial forgings. In the second half of the century the company entered the fittings and valve markets with the introduction of the Olet® fitting line. Subsequently complementary products were added including forged steel fittings, forged steel valves and more recently cast steel valves. The company was privately owned until 1967, when it was sold to Gulf & Western Industries. Under Gulf & Western, Bonney continued to produce valves and fittings at plants located in the USA and Italy. Bonney Forge remained a Gulf & Western company until 1984 when John Leone led a successful leverage buyout from Gulf & Western. Since that time, Bonney Forge has remained a private, closely held family owned company. For more than a century, Bonney Forge has achieved manufacturing excellence through the detailed attention to customer's needs and producing consistently superior flow control products. Today, the Bonney Forge name is synonymous with quality that exceeds all industry standards.
Bonney (1876-1909 Philadelphia, PA / 1909-1953 Allentown, PA) Sub Brands / Trade Names / Trademarks
- There are two trademarks listed in this document from 1915 that cannot yet be found. Registration numbers 104,199 (Vises and Lathe-dogs) and 105,781 (Wrenches)
- Edit: Thanks to Russ Allen, the Trademarks are:
- Indispensable (Vises & Lathe Dogs) (First Use 1/1/1892)
- Crocodile (Wrenches) (First Use 5/8/1909)
- We found another Trademark, #99,274 that also does not come up in TSDR.
- Edit: Thanks to Russ Allen, the Trademark is:
- Vixen - (Wrenches) (First Use 1908)
- Two trademarks from 1923 that do not come up in TSDR: #172,633 and #173,993 (found on page 1,513 in the 1923 Index of Patents under topic Wrenches in Class 23)
- Edit: Thanks to Russ Allen, the 1923 Trademarks are:
- Silver King - (Wrenches) (First Use 10/27/1922)
- 'CV' - (Tappet Wrenches) (First Use 11/4/1922)
- Two trademarks from 1925 that do not come up in TSDR: #190,188 and #214,643 (found on page 1,774 in the 1923 Index of Patents under topic Wrenches in Class 23)
- Edit: Thanks to Russ Allen, the 1925 Trademarks are:
- Rectangle with Bonney Shield and "Only The Best" to the left, and "Bonney Original" at right, "Chrome Vanadium" on bottom - (Wrenches) (First Use 11/15/1922)
- 'CV' - (Engineers, Open-End, Single End Service, and Water Pump Packing Nut Wrenches) (First Use 12/19/1922)
- Chrome-Vanadium - Script Text (Wrenches) (First Use 11/15/1922)
- Two Trademarks from 1933, that do not come up in TSDR: SN #338,597 and #340,108 (See TUHEX below)
- See 1935 Index of Trademarks for multiple TM renewals.
- See 1948 Index of Trademarks for multiple TM renewals.
- TUHEX (Wrenches) (9/32 - ??) Comes up in a search here but cannot be located in PTO Databases SN #340108 // Registration #307,975 See 1933 Index of Trademarks Page 127
- Bon-E-Con (Wrenches, Ratchets, Sockets) (First Use 1/12/1953)
- Zenel (Wrenches, Ratchets) (First Use 8/31/1932)
- Chrome Vanadium (circle CV) (Wrenches, Ratchets, Sockets, Specialty) //
- 2nd CV Logo (Plaid Triangle CV)
- 'C V' (letters only) (Engineers Wrenches, Open End Wrenches, Single End Service Wrenches) (First Use 12/19/1922) //
- 'C V' (Letters only) (Mechanics' Tools) (First Use 12/19/1922)
- Bonaloy (Wrenches) (First Use 3/6/1939)
- Champion (Vises) (First Use 1887)
- Hercules (Vises, Adjustables) (First Use 1904)
- Hercules -Tapered- (Wrenches, Sockets & Attachments) (First Use 8/25/1928)
- Wrenches (Drawing of a DOE with sticker on shank) (First Use 11/15/1922)
- Tomahawk (Combination Tool - Hammer, hatchet, pincers, wire-cutter, belt punch, tack claw, screwdriver, and wire splicing clamp) (First Use 4/1908)
- Dreadnought (Wrenches) (First Use 6/1/1915)
- Ajax (Vises)
- Vixen (Alligator Wrenches)
- Masterpiece (Pipe Wrenches)
- Always Ready (Alligator Wrenches)
- Crocodile (Alligator Wrenches)
- Bonney Stillson (Pipe Wrenches)
- Gipsey (Vises)
- Bonney (Arched Letters) (Wrenches & Vises) (First Use 1876) NOTE: This Trademark was filed by Armstead O. Bills (Vice President) on 11/27/1907) **Now owned by Snap-On
- Bonney Shield Design (All tools - First Use July 1, 1913)
- Bonney Oval with Bonney in Center (Label for Tool Boxes and Packages) (First Use 1935) **Now owned by Snap-On
- Lehigh (Bonney Shield design with Lehigh) (First Use 12/15/1915) (appears to be mostly masonry tools but trademark also lists wrenches and vises)
- SIMANG (Chisels, Wrenches, Hammers, Snips, etc.) (First Use 9/1/1926)
- BONNEY - Text (All Tools) (First Use December, 1945) Filed by Utica Tool Co. // **Now owned by Snap-On
- LOC-RITE - (Socket Wrenches) (First use 2/14/1964) Filed by Kelsey-Hayes // **Now owned by Snap-On
Contract Production for:
- Crescent Niagara (Ratchets)
- John Deere (Wrenches, Ratchets, Drive Tools, Sockets)
- Bethlehem Spark Plug Co. (Ratchets)
- MATCO (Wrenches)
- Craftsman (C-####-C Wrenches)
- Dayton (Ratchets [sweetheart FT])
Key Tool Stamping Terms (stamped/forged into tools):
- Chrome - Vanadium (Circle CV)
- Alloy Steel